Beam to beam with end-plate. Bolts may be placed inside and/or outside of the beam profile flanges. The joint can be built with a welded plate into the landing beam flanges or with a beam cut.

Profile H L U Pipes Tubes
Beam (2)
Landing Beam (1)
Joint schema

Connection drawing


In this S005 enginesheet, you can choose the eccentricity of the beam related to the plate (g1 and g2). Also, the beam profile rotation from its centroid. There is a stiffeners checkbox. If marked, back stiffeners will be taken into account and eventually created in Tekla.

Identifier Description Choices Units
Stiffeners If checked, back stiffeners will be created Checkbox None

Related Common Parameters: