S003

Beam frontplate joint with arriving bracing. The bracing can reach any type of element: beams, columns, other bracings, etc. This landing element will not be checked.

The bolts will be centered on the bracing height. The width of the gusset plate is calculated from the distances e1 and p1.

Only H, L or U arriving. Bolted web to the gusset plate.

Allowed Profiles:

Profile H L U Pipes Tubes
Bracing (2)
Landing Profile (1)
Joint schema

Connection drawing

Parameters:

You will need to provide the following extra parameters in a S003 enginesheet:

Identifier Description Appearing in Units
j Joint gap. If pipe/tube: Distance between in-pipe plate and gusset plate.
Else: Distance between profile and gusset plate.
None `mm`
s Side gap. Distance between the cover plates and any of the virtually clashing elements. None `mm`

Related Common Parameters:

Back